Your shopping cart is empty!

Different shipping methods available.
Fast delivery, stocked items are shipped the same day (ordered before 12:00)

Start
Pollux9+ Strobe | LED Extra light with built-in strobe | 218 mm (9") - 120W

Pollux9+ Strobe | LED Extra light with built-in strobe | 218 mm (9") - 120W

Item ID: 33491234

Sorry - this product is currently not avaiable for purchase.

Pollux9+ Strobe is a further development of LEDSON's immensely popular Pollux9+ Gen 2. Available with Drive or Spot light pattern that provides a wide & long or distant light pattern from the TIR reflectors.

The extra light also features a selectable position light (white or orange), stable mounting, electronic temperature optimization, Goretex pressure equalization membrane and all thePollux9+, but the Pollux9+ Strobe also has a strong warning light consisting of four powerful LEDs that can be set to five different flash patterns, one of which is ECE R65 approved.

Flash pattern

Single flash (ECE R65)
Double flash
Triple flash
Quadruple flash
Continuous hyperbolic flash

Characteristics

Five different flash patterns, one ECE R65 approved
Synchronizable with each other
E-marked (E8, ref. 37.5), ECE R112 / R10 / R7
EMC-proof (does not interfere with the radio)
With position light (4 LEDs) in yellow-orange or xenon white, connect the color you want
Driving beam light pattern (wide and oblong) with range 960 m (0.25 lux), 480 m (1 lux)
"Spot beam" light pattern (oblong with light far ahead on the roadway) with range 1148 m (0.25 lux), 574 m (1 lux)
12000 lumens (theoretical), 9600 lumens (actual)
Cool white light (6500 K)
TIR optical system (Total Inner Reflection)
Pressure equalization membrane
36 months warranty

Technical data

120 W (12 x 10 W Cree XM-L2 LED)
4 LEDs for flashing light
Nominal power 92.4 W
IP68 (water/dust proof)
6-pin DT connector (2-pin adapter included)
Electronic thermal management
Voltage 9-36 V
Load 7.7 A @ 12 V and 3.6 A @ 24 V

Dimensions & weight

Width: 218 mm
Height: 234.5 mm (incl. bracket)
Depth: 68.5 mm
Weight: 1.9 kg
Cable length: 650 mm

What is included?

Pollux9+ Strobe LEDSON LED extra light 9"
Bolts and screws to attach the strobe with either one or two fixing points
DT connector (6-pin, 2-pin adapter included)
Installation instructions

The DT connector must not be cut off, as this increases the risk of moisture damage. Damage to the DT connector will void the warranty.

Supplied individually.

To the web shop's start page »

Sitemap »

Customer favorites

Yellow stone chip guard for Ledson Sledge9
€22
Info Buy
Have selection options

Pollux9+ Gen 3 Strobe LED Extra Light 218 mm (9") - 120W
€302
Info Buy
Pollux7+ Gen3 LED extra light | Driving beam
€201
Info Buy
Have selection options

Stone guard/filter for LEDSON Orion10 & LEDSON Libra10
€24
Info Buy