Sarox9's contemporary design is a neat combination of stylish and progressive, where the inside of the extra light impresses with quality components that make a big difference when you go out and drive in the dark:
- 1 lux at 469 meters
- 10200 actual lumens
- IP68/IP69K encapsulation provides solid protection against harsh climates on our Nordic roads
- ECE R112, R10, R7 e-markings
- Membrane for automatic pressure equalization
- Electronic thermal management for optimal LED performance and lifetime
Sarox9+ has a combined light pattern (combo)
A combo light pattern is a mix between high beam (long distance) and flood light (short distance). Sarox9+ has diodes that reflect light both straight ahead and to the sides. This beam pattern is ideal if you want a lot of light close to the vehicle for the smaller roads, but still have the length to light up the road far ahead.
Sarox9 LED Auxiliary Light
Characteristics
- With position light, yellow-orange or xenon white (plug in the color you want)
- Combo beam light pattern (a mix between spot and flood)
- E-marked ECE R112 (Ref. 45), R10 / R7 (white position light)
- Range: 938 m (0.25 lux), 469 m (1 lux)
- EMC-proof (does not interfere with radio)
- 12000 lumens (theoretical), 10200 lumens (actual)
- Cool white light (5700K)
- TIR (Total Inner Reflection) harnesses all light and minimizes spill light
- ETM (Electronic Thermal Management) - adjusts the strength of the diodes depending on how hot they are for an optimal lifetime
- Side reflective optical system
- Pressure equalization membrane
- Aluminum heat sink
- Adjustable stainless steel bracket
- Lexan polycarbonate
- Polycarbonate lens
- 24 months warranty
Technical data
- 120W (4 x 20W Cree LED + 4 x 10W Cree LED)
- IP68/IP69K (water/dust tight)
- DT connector 4 pin included
- Voltage 9-36 V
- Load high beam: 8.1A @ 12V and 4.4A @ 24V
- Position light load: 0,9A
Dimensions & weight
- Width: 218 mm
- Height: 218 mm (233 mm incl bracket)
- Depth: 84 mm
- Cable length: 42 cm
- Weight: 1.8 kg
What is included?
- Ledson Sarox9+ LED extra light 9"
- Bracket, bolts and screws to attach the extra light with either one or two fixing points
- DT connector (4-pin)
- Installation instructions
Installation instructions for the cables (detailed installation instructions included in the package)
- Red: Extra light (+)
- Black: Extra light / Position light (- earth)
- White: Position light (+) for white position light
- Yellow: Position light (+) for yellow/orange position light
- The DT connector must not be cut off, as this increases the risk of moisture damage. Damage to the DT connector will void the warranty.