- Futuristic design with stylish selectable position light in white or orange
- Orion+ delivers ample performance, 1 lux at 425 m
- E-marked according to ECE R112/R10/R7
- 8500 actual lumens
LEDSON Orion+
In addition to the futuristic design of Orion+, the auxiliary light is also equipped with a stylish position light that is switchable between xenon white and orange: you choose which you want. Orion+ is E-marked according to ECE R112, R10 and R7, is ETM/EMC cut-off to not interfere with radio reception, 8500 actual lumens, 6000K light temperature and much more.
Comes in Driving Beam, which makes a great combo of even light across the entire roadway.
Features:
- With position light, yellow-orange or xenon white (plug in the color of your choice)
- Driving beam light pattern that mimics and enhances the vehicle's regular light pattern
- E-marked E9 (Ref. 37.5), ECE R112 / R10 / R7 (white position light)
- Range: 850 m (0.25 lux), 425 m (1 lux)
- EMC-proof (does not interfere with radio)
- 10000 lumens (theoretical), 8500 lumens (actual)
- Cool white light (6000 K)
- ETM (Electronic Thermal Management) - adjusts the intensity of the diodes depending on how hot they are for optimal life
- Side reflective optical system
- Pressure equalization membrane
- Aluminum heat sink
- Adjustable stainless steel bracket
- Lexan polycarbonate front cover
- 24 months warranty
Technical data
- 100W (4 x 25W LED)
- IP68/IP69K (water/dust tight)
- DT connector / DT adapter 2-4 pin included
- Voltage 9-36 V
- Load 6.8 A @ 12 V and 3.4 A @ 24 V
Dimensions & Weight
- Width: 247 mm
- Height: 141 mm (176 mm incl bracket)
- Depth: 92 mm
- Weight: 1.82 kg
What is included?
- LEDSON Orion+ LED auxiliary light
- Bracket, bolts and screws to attach the extra light with either one or two fixing points.
- DT connector (4-pin)
- Installation instructions
Wiring:
- Red: Auxiliary light (+)
- Black: Extra light / Position light (- earth)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light
Delivered individually
- The DT connector must not be cut off, as this increases the risk of moisture damage. Damage to the DT connector will void the warranty.