Complete grille kit for Volkswagen Transporter T6 from 2016-2019 - designed to fit directly into the car's grill and give a stylish, factory-fitted look.
Grille kit Lazer Volkswagen Transporter T6: The kit includes 2 pcs Lazer ST4 as well as all necessary mounting parts such as 3D printed brackets, relay kit, wiring and clear instructions. Installation takes approximately 60 minutes and requires some machining of the grill with the included cutting templates for an accurate and quality installation.
Grille kit Lazer Volkswagen Transporter T6
| ST4 Evolution | |
| Voltage Range (DC) | 10-32V |
| Total Luminous Flux | 8272 lm |
| Colour Temperature | 5000 K |
| LEDs | 2 x 4 st |
| Position lights | No |
| Power Consumption | 94 W |
| Current Draw (14,4V) | 6,6 A |
| Certification | |
| High Beam (E9 approve) | ECE R112 |
| Photometric Data | |
| Horizontal/Vertical Beam Angle | 40° |
| 1 lux | 393 meters |
| 0,25 lux | 876 meters |
Mounting
- The mounting requires an effect on the car's grill. The mounting kit includes 3D printed cutting templates for precise mounting. The LED ramps are then mounted using the accompanying 3D printed mounting hardware.
Connection
- Depending on your car's equipment level and front headlights, a separate CANBUS interpreter may be required to output the high beam signal to the relay. This is not included in the kit, but is purchased separately.
What is included in the grille kit Lazer Volkswagen Transporter T6
- 2 pcs Lazer ST4 Evolution
- Mounting details
- Relay kit
- Assembly instructions
Grille kit LazerVolkswagen Transporter T6 is supplied as a complete kit