Complete grille kit for Volkswagen ID.Buzz from 2023 onwards - designed to fit directly into the car's grill and give a stylish, factory-fitted look.
Grille kit Lazer Volkswagen ID.Buzz: The kit includes 2 pcs of Lazer Linear 6 (standard or Elite version depending on the model chosen) as well as all necessary mounting parts such as 3D printed bracket, relay kit, wiring harness and clear instructions. Installation takes approximately 60 minutes and requires some machining of the grill with the included cutting templates for an accurate and quality installation.
Grille kit Lazer Volkswagen ID.Buzz
| Linear 6 | Standard | Elite |
| Voltage range (DC) | 10-32V | 10-32V |
| Total Luminous Flux | 4500 lm | 8100 lm |
| Colour Temperature | 5000 K | 5000 K |
| LEDs | 2 x 6 st | 2 x 12 st |
| Position light | No | No |
| Power Consumption | 42 W | 84 W |
| Current Draw (14,4V) | 2,92 A | 5,8 A |
| Certification | | |
| High Beam (E9 approval) | 2 x 12,5 | 2 x 17,5 |
| Helljus | ECE R112 | ECE R112 |
| Photometric Data | | |
| Horizontal/Vertical Beam Angle | 56° | 64° |
| 1 lux | 349 meters | 398 meters |
| 0,25 lux | 698 meters | 796 meters |
Assembly
- The installation requires an impact on the car grill. The mounting kit includes 3D printed cutting templates for precise mounting. The LED ramps are mounted afterwards with the corresponding 3D printed mounting brackets.
Connection
- Depending on your car's equipment level and front headlights, a separate CANBUS interpreter may be needed to output the high beam signal to the relay. This is not included in the kit, but is purchased separately.
Grille kit Lazer Volkswagen ID.Buzz
What is included in the Grille kit Lazer Volkswagen ID.Buzz
- 2 pcs Lazer Linear 6
- Mounting details
- Relay kit
- Sssembly instructions
Grille kit Lazer Volkswagen ID.Buzz is supplied as a complete kit